Well Pumping Systems and Services
Well Pump Failure or Breakdown Services
Do you have a problem with your Well Pump? For Bristol and the surrounding area’s call 01179 552481 for our 24 hour 7 day a week emergency call out service.
We have extensive experience with all types of well pumps, we can very quickly determine the source of the problem and either repair the pump on site with new parts or install a new one depending on the problem. We can repair and replace all brands of well pump including:
Some of the most common issues that are found with Well Pump Failure are:-
- Loss of Flow
- Low Discharge Pressure
- Electrical Fault
- Excessive Power Usage
- Pump running when no demand
- Excessive Noise & Vibration
Our experienced engineers are available to attend site, identify the issue and resolve the pump failure quickly ensuring the lack of water supply is kept to a minimum.
When you rely on a private water source via a well the importance of its reliability is Critical. Without these wells, these homes do not have a water supply which is why it is so vital to have an experienced team on hand to attend in the event of a breakdown.
What is a Well Pump?
Well pumps are used for private water supplies, pressure boosting, irrigation, rainwater collection and fire-fighting. They are usually multistage centrifugal pumps ensuring higher pressures and are often cooled by the liquid passing the motor.
There are numerous types available on the market and they need to be sized specifically for each application. To select the correct Well Pump for an application we need the following information
- Depth of Well
- Size of Well
- Replenishing rate of Well
- Size of pipework between pump and end location
- Volume of Water Rate
- Height/Head (m) that water needs to be pumped
Need Help and Advice on Pump Selection?
If you require advice on a new well pump installation, replacement or general advice, please don’t hesitate to contact us. This includes sizing the pump, recommending pipe size and power supply.
We are able to analyse your water sample and recommend a suitable filtration package to suit your requirements, We recommend that your water source is tested prior to use.
For more information on Well Pump Replacement and Installation contact us.
What is the law on Private Drinking Water Supply?
These regulations say the water must be wholesome to drink -defined by a list of bacterial and chemical parameters.
The allowed concentration of sodium is 200 mg/l, there is no mention of softened water. Allowable lead concentrations have been reduced again. There are extra parameters for supplies over 10m3/day.
We are able to take water samples from your property and get them tested by an independent UKAS Accredited Laboratory.
Contact Our Expert Team
If you require a well pump fitted, or have a problem with your existing unit, call us now on Bristol: 0117 9552481, operating 7 days a week, we also offer a 24-hour emergency call out service in the event of a breakdown.